Video Link

$139.00

In stock

Compact Design: Fits perfectly in the SplashDrone 3+
40 different channels: Compatible with all 5.8G analogue Receivers.
High quality antenna: Long range stable transmission.
Built-in 5-Pin cable: Female connection “JST” for Power Supply.

Free shipping over $1,000 Australia-wide. Orders usually ship within 1–2 days once confirmed.
Secure checkout Encrypted payment
Expert advice Help choosing the right gear

Category Accessories & Spares

The Mi600C video link is the 5.8G FPV video transmitter that sends live video from your SwellPro drone to its remote controller. It’s already built into the drone, so you’ll usually only need one as a replacement part during a repair. Order it online here with secure checkout.

When you need a Mi600C video link

A drone that flies normally but shows no picture, a frozen feed or heavy static may have a video transmitter problem. Hard landings and damage over time can affect electronics. Replacing the Mi600C video link restores the live feed you rely on for framing shots and placing baits.

Before ordering, rule out simpler causes such as a loose antenna, the wrong channel or a fault in the controller. Our team can help you narrow it down and confirm the right part.

Video Link

Overview	The video link is already built-in in the drone to transmit videos from the drone to the remote controller. Customers only need it only when repairing. Mi600C 5.8G FPV video transmitter is sealed in an aluminium body; and is compatible with all analogue receivers on the market. The Mi600C uses a 5-pin socket and flat data cable, which makes it more convenient to use.
In The Box	VIDEO LINK× 1
Specifications	Transmit power: 600mw Frequency: 5.8G Channel: 40CH Input voltage: 7.4V-28V Antenna gain: 2db~3db Working Current: 220mA @12V Operation Temperature: -20-60 ℃ Video format: NTSC/PAL Auto Video Band-width: 8M Net weight: 20g Physical size: 31239mm Signal Range: Up to 2-3KM
Compatibility	SplashDrone3+ , SplashDrone3 and Swellpro Fisherman

Key specifications

It’s a compact transmitter sealed in an aluminium body, designed to fit neatly inside the SplashDrone 3+. The 5-pin socket and flat data cable make it straightforward to connect during a repair.

600mW transmit power on 5.8G, with 40 channels
Compatible with 5.8G analogue receivers
7.4V to 28V input, drawing 220mA at 12V
NTSC/PAL auto video format
20 g, measuring 31 x 23 x 9 mm
5-pin socket, flat data cable and JST power connection

Fitting tips

Replacing internal electronics on a waterproof drone means opening sealed areas, so work on a clean, dry bench and follow SwellPro’s repair guidance. Note the cable routing before removing the old unit, reseat the 5-pin plug firmly, and check every seal before the drone goes near water again. If you’re not confident, use a qualified repairer.

Frequently asked questions

Which drones use the Mi600C video link?

It’s listed for the SwellPro SplashDrone 3+, SplashDrone 3 and SwellPro Fisherman. It suits the SplashDrone 3+, SplashDrone 3 and SwellPro Fisherman.

Do I need a Mi600C video link if my drone is working?

Usually not. The transmitter is already built into the drone, so most pilots only order one when the original is damaged or faulty. Some operators keep a spare in their repair kit to reduce downtime.

What range does the Mi600C video link offer?

The specification lists a signal range of up to 2 to 3 km. Real-world range depends on antenna condition, interference and terrain, and you still need to keep the drone within visual line of sight under Australian rules.

Pairs well with the Mi600C Video Link

Get your live feed back and your drone flying again. Add the Mi600C video link to your cart today, or chat with our team to confirm it’s the right part.

Browse the full Drones Direct range. Full specifications and support for the Mi600C video link are on the SwellPro website.